logol
Home
 
Legato
   
         
 
 

ChronoLogic’s Distributed Virtual Instrument (DVI) product family, enabled with USB-inSync™ technology allows users to combine multiple synchronized hardware modules with software to create a powerful virtual instrument.

The DVI product range provides users with the ultimate in test & measurement flexibility. Each DVI is a simple stand alone unit that provides a specific functionality in a small, rugged form factor with all of the plug-and-play benefits of USB. In addition, DVI’s can be combined either by plugging them directly into your PC’s USB host controller (using supplied cables), or with ChronoLogic’s Maestro – Master Timing Hub and used as building blocks to create large, synchronous test setups consisting of more than 100 devices with multiple functionalities.

By combining DVI hardware with ChronoLogic’s free software or LabVIEW drivers (provided), multiple modules can be controlled as one synchronous, multi-function device. This is possible due to the fact that each DVI is enabled with USB-inSync™ technology, which allows multiple USB modules to be synchronized to within ±1ns, allowing them to offer precision timing and synchronization capability in a distributed platform. Such precision timing capability has traditionally been limited to expensive, fixed rack-based instrumentation platforms.


CL4000 – Oscilloscope/Digitizer

     

14 bit resolution

100MS/s sample rate

200 MHz front-end analog Bandwidth

85dBc SFDN

Input ranges from 80mVpp to 80Vpp

Fully Isolated inputs

Probe calibration output

Over 100 channels
(synchronized with USB-inSync™)

 

.
  Modules under development: Coming soon..
 

CL4100 – 16+2 Channel 1 GS/s Logic Analyser

Sampling rate up to 1 GS/s

Data buffer of 128 Mbytes

USB-powered

2 high-speed Active Probes

16 single-ended channels

Programmable logic thresholds

2 CMOS trigger/pattern outputs

Over 100 channels
(synchronized with USB-inSync™)

 

.
 

CL4200 – 2.5 GS/s Digital Input / Output

DC to 1.25 Gbps data rate

400 ps Resolution

Simultaneous signal generation / capture

Multi-Standard Input / Output Interface

Programmable Sampling Rates

Programmable Pre-Emphasis

Programmable Hysteresis

Over 100 channels
(synchronized with USB-inSync™)

 

.
 

CL4310 – 18 bit Digitiser with Bridge Sensor interface

1 MSPS sample rate

Fully Isolated input

Differential analog input

Continuous Time anti aliasing filter

95 dB Dynamic range

Built-In Excitation with sense

Built-In Shunt Calibration

IEEE 1451.4 Class 2 TEDS support

Over 100 channels
(synchronized with USB-inSync™)

 

.
 

CL4320 – 18 bit Digitiser with IEPE Sensor Interface

1 MSPS sample rate

Fully Isolated input

Analog or IEPE compliant input

Configurable 8-Order Continuous Time Filter

95 dB Dynamic range

Built-In IEPE current source

IEEE 1451.4 Class 1 TEDS support

Over 100 channels
(synchronized with USB-inSync™)

 

.
  USB
 

Tell us what you think

ChronoLogic is actively seeking input to our product development process. If you have any thoughts / comments or suggestions relating to the DVI concept or product range, please contact us at

   
  USB
     
USB

DVI Range        BUY NOW

USB
 


Oscilloscope/Digitizer - CL4000:
Product Data Sheet


Modules under development -
coming soon...

CL4100 -
16+2 Channel 1 GS/s Logic Analyser:
Product Data Sheet

CL4200 -
2.5 GS/s Digital Input / Output:
Product Data Sheet

CL4310 -
18 bit Digitiser with Bridge Sensor interface:
Product Data Sheet

CL4320 -
8 bit Digitiser with IEPE Sensor interface:
Product Data Sheet

 

 
     
USB Contact Us  
USB Click here for fast access to a ChronoLogic team member that can assist you.